How to edit gcode? - Is it possible to salvage a job by restarting after a jammed extruder? - Snapmaker 2.0 - Snapmaker: where creation happens

Stepped away for a bit, glad you’re making some progress! Yea, the G92 command is a way to set an arbitrary reference point for future commands. It sounds like you got it, but I’ll just reiterate: that G92 E0->G92 E115.7035 change was because over, say, 1000 lines of gcode 115mm of filament was extruded, and if I don’t change the reference as soon as the first G1 X Y E116 is executed it’ll extrude 116mm of filament. So you have to tell the machine that it’s starting at 115.7 so it extrudes 0.3

RAISE3D Pro3 Large Format Professional Dual Extruder 3D Printer

Issues with generating g-code? - Getting Started - Snapmaker

Work Origin changes after loading a gcode file - Snapmaker 2.0

RAISE3D Pro3 Large Format Professional Dual Extruder 3D Printer

GUIDE] Setting up the Neptune 4 Pro with Cura 5.4 : r/ElegooNeptune4

Dual Extruder problems? - Snapmaker 2.0 - Snapmaker: where

Luban V4.5: Known Issues & Corresponding Solutions - Snapmaker

3D Printer Nozzle Jam: Main Causes and Cleaning Methods – Snapmaker

Dual Extruder and Prusaslicer - Snapmaker 2.0 - Snapmaker: where

Dual extruder stops to extrude - Snapmaker 2.0 - Snapmaker: where

Dual Extruder - Left feeding gear issue - Snapmaker 2.0

Machine calibration problems - Snapmaker 2.0 - Snapmaker: where

Unable to configure SM2A350 with Dual Extruder in Cura. What am I

How to edit gcode? - Is it possible to salvage a job by restarting